JOPSS - Search Results

JAEA Reports

Mesh effect around burnable poison rod of cell model for HTTR fuel block

Fujimoto, Nozomu*; Fukuda, Kodai*; Honda, Yuki*; Tochio, Daisuke; Ho, H. Q.; Nagasumi, Satoru; Ishii, Toshiaki; Hamamoto, Shimpei; Nakano, Yumi*; Ishitsuka, Etsuo

JAEA-Technology 2021-008, 23 Pages, 2021/06

JAEA-Technology-2021-008.pdf:2.62MB

The effect of mesh division around the burnable poison rod on the burnup calculation of the HTTR core was investigated using the SRAC code system. As a result, the mesh division inside the burnable poison rod does not have a large effect on the burnup calculation, and the effective multiplication factor is closer to the measured value than the conventional calculation by dividing the graphite region around the burnable poison rod into a mesh. It became clear that the mesh division of the graphite region around the burnable poison rod is important for more appropriately evaluating the burnup behavior of the HTTR core..

JAEA Reports

Development of neutron transport calculation codes for 3-D hexagonal geometry, 2; Improvement and enhancement of the MINISTRI code

Sugino, Kazuteru; Takino, Kazuo

JAEA-Data/Code 2019-011, 110 Pages, 2020/01

JAEA-Data-Code-2019-011.pdf:3.37MB

A deterministic discrete ordinates method (SN method) transport calculation code for three-dimensional hexagonal geometry has been developed as the MINISTRI code (Ver. 7.0). MINISTRI is based on the triangle-mesh finite difference method, which can perform neutron transport calculations with high accuracy for cores of fast power reactors and assemblies of the Russian BFS critical facility. The present study has derived a proper scheme for remarkably improving the convergence of MINISTRI by investigating the issue of previous MINISTRI (Ver. 1.1), which sometimes plays a poor convergence performance in calculations for large-scale power reactor cores. The verification test of improved MINISTRI has been carried out for various cores by setting the reference result as the multi-group Monte-Carlo calculation with the same cross-sections as used in MINISTRI. As a result, it is found that the agreements are within 0.1% for eigenvalues and within 0.7% for power distributions. Thus, the satisfying accuracy of MINISTRI has been confirmed. In order to reduce the calculation time, the initial diffusion calculation scheme and the parallel processing have been implemented. As a result, the calculation time is reduced to the approximately one tenth compared with previous MINISTRI. Furthermore, adoption of the treatment of the anisotropic cell streaming effect, preparation of the perturbation calculation tool, implementation of the function for specification of the triangle-mesh-wise material and merging of the hexagonal-mesh calculation code MINIHEX have been carried out. Thus, the versatility of MINISTRI has been enhanced.

JAEA Reports

Study on the analyses of the reactor physics benchmark problem for the LWR next generation fuels

Research Committee on Reactor Physics

JAERI-Research 2004-004, 409 Pages, 2004/03

JAERI-Research-2004-004.pdf:28.53MB

This report summarizes the second phase (FY2001-2002) activity of "the Working Party (WP) on Reactor Physics for LWR Next Generation Fuels". The next generation fuels mean the ones aiming at further extended burn-up such as 70GWd/t over the current design. In the WP, the benchmark activity has been conducted to investigate and improve the calculation accuracy of the nuclear characteristics of the next generation fuels. In the second phase activity, all benchmark results were compiled and compared. Based on the comparison, the present status of calculation accuracy for the next generation fuels has been confirmed, and the factors causing the calculation differences were analyzed in detail. Moreover, analyses of the post irradiation and critical experiments with the codes used in the benchmark were reviewed, and future experiments and research subjects necessary to reduce the calculation differences were discussed and proposed.

Journal Articles

Update status of benchmark activity for reactor physics study of LWR next generation fuels

Unesaki, Hironobu*; Okumura, Keisuke; Kitada, Takanori*; Saji, Etsuro*

Transactions of the American Nuclear Society, 88, p.436 - 438, 2003/06

In order to investigate the calculation accuracy of the nuclear characteristics of LWR next generation fuels, the Research Committee on Reactor Physics organized by JAERI has proposed "Reactor Physics Benchmark for LWR Next Generation Fuels". The next generation fuels aim at very high burn-up of about 70GWd/t in PWR or BWR with UO $_{2}$ or MOX fuels whose fissile enrichments may exceed the Japanese regulatory limitations for the current LWR fuels such as 5wt.% U-235. Until now, twelve organizations have pariticipated in the benchmark activity. From the comparison with the cell burn-up calculation results using different codes and library data, status of the calculation accuracy and future subjects are clarified.

Journal Articles

Benchmark results of burn-up calculation for LWR next generation fuels

Okumura, Keisuke; Unesaki, Hironobu*; Kitada, Takanori*; Saji, Etsuro*

Proceedings of International Conference on the New Frontiers of Nuclear Technology; Reactor Physics, Safety and High-Performance Computing (PHYSOR 2002) (CD-ROM), 10 Pages, 2002/10

In order to investigate the calculation accuracy of the nuclear characteristics of LWR next generation fuels, the Research Committee on Reactor Physics organized by Japan Atomic Energy Research Institute has proposed "Reactor Physics Benchmark for LWR Next Generation Fuels". The next generation fuels aim at very high burn-up of about 70GWd/t in PWR or BWR with UO2 or MOX fuels whose fissile enrichments may exceed the Japanese regulatory limitations for the current LWR fuels such as 5wt.% U-235. Twelve organizations have carried out the analyses of the benchmark problems with different codes and data, and their submitted results have been compared. As a result, status of accuracy with the current data and method and some problems to be solved in the future were clarified.

JAEA Reports

Proposal and analysis of the benchmark problem suite for reactor physics study of LWR next generation fuels

Research Committee on Reactor Physics

JAERI-Research 2001-046, 326 Pages, 2001/10

JAERI-Research-2001-046.pdf:14.45MB

The Working Party on Reactor Physics for LWR Next Generation Fuels in the Research Committee on Reactor Physics, which is organized by the Japan Atomic Energy Research Institute, has recently proposed a series of benchmark problems to investigate the calculation accuracy of the nuclear characteristics of LWR next generation fuels. The next generation fuels mean the ones aiming for further extended burnup such as 70GWd/t over the current design. The resultant specifications of the benchmark problem therefore neglect some of the current limitations such as 5wt%235U to achieve the above-mentioned target. The Working Party proposed six benchmark problems, which consist of pin-cell, PWR assembly and BWR assembly geometries loaded with uranium and MOX fuels, respectively. The present report describes the detailed specifications of the benchmark problems. The results of preliminary analyses performed by the eleven member organizations and their comparisons are also presented.

JAEA Reports